View CF5006AKC-1_656974.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sm5006 series seiko npc corporation ? crystal oscillator module ics overview the sm5006 series are crystal oscillator module ics, that incorporate high-frequency, low current consump- tion oscillator and output buffer circuits. highly accurate thin-?m feedback resistors and high-frequency capacitors are built-in, eliminating the need for external components to make a stable 3rd overtone oscillator. features up to 107mhz operation capacitors c g , c d built-in inverter ampli?r feedback resistor built-in ttl input level 16ma (v dd = 4.5v) drive capability 4ma (v dd = 4.5v) drive capability (5006ah ) output three-state function 2.7 to 5.5v supply voltage oscillator frequency output 8-pin sop (sm5006 s) chip form (cf5006 ) series configuration version *1 *1. chip form devices have designation cf5006 . gm ratio 3v operating 5v operating built-in capacitance r f [k ? ] input level output duty level output load (max) [pf] recommended operating frequency range *2 [mhz] *2. the recommended operating frequency is a yardstick value derived from the crystal used for npc characteristics authenticati on. however, the oscilla- tor frequency band is not guaranteed. speci?ally, the characteristics can vary greatly due to crystal characteristics and moun ting conditions, so the oscillation characteristics of components must be carefully evaluated. output load (max) [pf] recommended operating frequency range *2 [mhz] output waveform *3 t r /t f [ns] *3. 5006 n : c l = 50pf, cmos load, 5006 k : c l = 15pf, 10ttl load, 5006ah : c l = 15pf, cmos load c g [pf] c d [pf] sm5006anas 0.5 ?? 50 22 to 30 8/8 8 16 8.2 ttl cmos sm5006anbs 1 ?? 50 30 to 40 8/8 8 16 5.6 ttl cmos sm5006ancs 2 15 22 to 30 50 40 to 60 7/7 8 16 4.9 ttl cmos sm5006ands 2 15 30 to 50 50 50 to 70 7/7 8 16 2.6 ttl cmos sm5006anes 3 15 50 to 70 30 70 to 100 6/6 8 16 2.6 ttl cmos (15) *4 *4. sop package only sm5006anfs 4 ?? 30 80 to 107 6/6 8 16 2.6 ttl cmos (15) *4 sm5006cncs 2 15 22 to 30 15 40 to 60 8/8 8 16 4.9 ttl cmos 50 40 to 50 sm5006cnds 2 15 30 to 40 15 50 to 70 8/8 8 16 2.6 ttl cmos sm5006cnes 3 15 50 to 70 15 70 to 100 7/7 8 16 2.6 ttl cmos sm5006bncs 2 15 22 to 70 15 22 to 100 7/7 8 16 no ttl cmos 50 22 to 70 sm5006bnes 3 15 22 to 70 30 70 to 107 6/6 8 16 no ttl cmos (15) *4 sm5006dncs 2 15 22 to 40 15 22 to 70 8/8 8 16 no ttl cmos 50 22 to 50 sm5006dnes 3 15 22 to 70 15 22 to 100 7/7 8 16 no ttl cmos 50 22 to 70 sm5006akas 0.5 ?? 15 22 to 30 4/4 8 16 8.2 ttl ttl sm5006akbs 1 ?? 15 30 to 40 4/4 8 16 5.6 ttl ttl sm5006akcs 2 ?? 15 40 to 60 4/4 8 16 4.9 ttl ttl sm5006akds 2 ?? 15 50 to 70 4/4 8 16 2.6 ttl ttl sm5006ckds 2 ?? 15 50 to 70 4/4 8 16 2.6 ttl ttl sm5006bkcs 2 ?? 15 22 to 70 4/4 8 16 no ttl ttl sm5006dkcs 2 ?? 15 22 to 70 4/4 8 16 no ttl ttl sm5006ahas 0.5 ?? 15 22 to 30 7/7 8 16 8.2 ttl cmos sm5006ahbs 1 ?? 15 30 to 40 7/7 8 16 5.6 ttl cmos sm5006ahcs 2 ?? 15 40 to 60 7/7 8 16 4.9 ttl cmos sm5006ahds 2 ?? 15 50 to 70 7/7 8 16 2.6 ttl cmos
sm5006 series seiko npc corporation ? ordering information package dimensions (unit: mm) ? 8-pin sop device package sm5006 s 8-pin sop cf5006 ? chip form 4.4 0.2 1.5 0.1 0.05 0.05 0.4 0.2 5.2 0.3 0.4 0.1 0.15 + 0.1 ? 0.05 0 to 10 6.2 0.3 0.695typ 1.27 0.12 m 0.10
sm5006 series seiko npc corporation ? pad layout (unit: m) pinout (top view) pin description and pad dimensions block diagram chip size: 0.92 1.31mm chip thickness: 300 ?30? chip base: v dd level q vdd xt vss (0,0) (920,1310) x y inhn xtn ha5006 1 xt vss q vdd 4 2 3 nc nc 8 7 6 5 xtn inhn number name i/o description pad dimensions [m] xy 1 inhn i output state control input. high impedance when low. pull-up resistor built in 195 212 2 xt i ampli?r input. crystal oscillator connection pins. crystal oscillator connected between xt and xtn 385 212 3 xtn o ampli?r output. 575 212 4 vss ground 766 212 5 q o output. output frequency (f o ) 765 1152 6 nc no connection 7 nc no connection 8 vdd supply voltage 162 1152 xt vss vdd q c g c d r f xtn inhn r g r d
sm5006 series seiko npc corporation ? specifications absolute maximum ratings v ss = 0v parameter symbol condition rating unit supply voltage range v dd ? 0.5 to 7.0 v input voltage range v in ? 0.5 to v dd + 0.5 v output voltage range v out ? 0.5 to v dd + 0.5 v operating temperature range t opr ? 40 to 85 c storage temperature range t stg chip form ? 65 to 150 c 8-pin sop ? 55 to 125 output current i out 5006 n , k 25 ma 5006ah 10 power dissipation p d 8-pin sop 500 mw
sm5006 series seiko npc corporation ? recommended operating conditions sm5006 series (package form) v ss = 0v parameter symbol series condition rating unit min typ max supply voltage v dd ana, anb, cnc, cnd, dnc f 50mhz, c l = 50pf 4.5 5.5 v f 70mhz, c l = 15pf 4.5 5.5 f 40mhz, c l = 15pf 2.7 3.6 anc, and, bnc, cne, dne f 70mhz, c l = 50pf 4.5 5.5 v f 100mhz, c l = 15pf 4.5 5.5 f 50mhz, c l = 15pf 2.7 3.6 f 70mhz, c l = 15pf 3.0 3.6 ane, anf, bne f 100mhz, c l = 15pf 4.5 5.5 v f 107mhz, c l = 15pf 4.5 5.5 f 50mhz, c l = 15pf 2.7 3.6 f 70mhz, c l = 15pf 3.0 3.6 aka, akb, akc, ckd, dkc f 70mhz, c l = 15pf 4.5 5.5 v akd, bkc f 70mhz, c l = 15pf 4.5 5.5 v aha, ahb, ahc, ahd f 70mhz, c l = 15pf 4.5 5.5 v input voltage v in all series v ss ? dd v operating temperature t opr ana, anb, cnc, cnd, dnc f 50mhz, c l = 50pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 0 + 70 f 40mhz, c l = 15pf, 2.7 v dd 3.6 ? 10 + 70 anc, and, bnc, cne, dne f 50mhz, c l = 50pf, 4.5 v dd 5.5 ? 40 + 80 c f 70mhz, c l = 50pf, 4.5 v dd 5.5 ? 20 + 80 f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 f 100mhz, c l = 15pf, 4.5 v dd 5.5 0 + 70 f 50mhz, c l = 15pf, 2.7 v dd 3.6 ? 20 + 80 f 70mhz, c l = 15pf, 3.0 v dd 3.6 ? 20 + 80 ane, anf, bne f 70mhz, c l = 50pf, 4.5 v dd 5.5 ? 20 + 80 c f 100mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 f 107mhz, c l = 15pf, 4.5 v dd 5.5 ? 20 + 80 f 50mhz, c l = 15pf, 2.7 v dd 3.6 ? 20 + 80 f 70mhz, c l = 15pf, 3.0 v dd 3.6 ? 20 + 80 aka, akb, akc, ckd, dkc f 50mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 0 + 70 akd, bkc f 50mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 20 + 80 aha, ahb, ahc, ahd f 50mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 15 + 75
sm5006 series seiko npc corporation ? cf5006 series (chip form) v ss = 0v parameter symbol series condition rating unit min typ max supply voltage v dd ana, anb, cnc, cnd, dnc f 50mhz, c l = 50pf 4.5 5.5 v f 70mhz, c l = 15pf 4.5 5.5 f 40mhz, c l = 15pf 2.7 3.6 anc, and, bnc, cne, dne f 70mhz, c l = 50pf 4.5 5.5 v f 100mhz, c l = 15pf 4.5 5.5 f 50mhz, c l = 15pf 2.7 3.6 f 70mhz, c l = 15pf 3.0 3.6 ane, anf, bne f 70mhz, c l = 50pf 4.5 5.5 v f 107mhz, c l = 30pf 4.5 5.5 f 50mhz, c l = 15pf 2.7 3.6 f 70mhz, c l = 15pf 3.0 3.6 aka, akb, akc, ckd, dkc f 70mhz, c l = 15pf 4.5 5.5 v akd, bkc f 70mhz, c l = 15pf 4.5 5.5 v aha, ahb, ahc, ahd f 70mhz, c l = 15pf 4.5 5.5 v input voltage v in all series v ss ? dd v operating temperature t opr ana, anb, cnc, cnd, dnc f 50mhz, c l = 50pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 15 + 75 f 40mhz, c l = 15pf, 2.7 v dd 3.6 ? 10 + 70 anc, and, bnc, cne, dne f 70mhz, c l = 50pf, 4.5 v dd 5.5 ? 40 + 85 c f 100mhz, c l = 15pf, 4.5 v dd 5.5 ? 20 + 80 f 50mhz, c l = 15pf, 2.7 v dd 3.6 ? 20 + 80 f 70mhz, c l = 15pf, 3.0 v dd 3.6 ? 20 + 80 ane, anf, bne f 70mhz, c l = 50pf, 4.5 v dd 5.5 ? 40 + 85 c f 100mhz, c l = 30pf, 4.5 v dd 5.5 ? 40 + 85 f 107mhz, c l = 30pf, 4.5 v dd 5.5 ? 20 + 80 f 50mhz, c l = 15pf, 2.7 v dd 3.6 ? 20 + 80 f 70mhz, c l = 15pf, 3.0 v dd 3.6 ? 20 + 80 aka, akb, akc, ckd, dkc f 50mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 15 + 75 akd, bkc f 50mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 20 + 80 aha, ahb, ahc, ahd f 50mhz, c l = 15pf, 4.5 v dd 5.5 ? 40 + 85 c f 70mhz, c l = 15pf, 4.5 v dd 5.5 ? 20 + 80
sm5006 series seiko npc corporation ? electrical characteristics 5006 n series 3v operation: v dd = 2.7 to 3.6 v, v ss = 0 v, ta = ? 20 to 80 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, v dd = 2.7v, i oh = 8ma 2.2 2.4 v low-level output voltage v ol q: measurement cct 2, v dd = 2.7v, i ol = 8ma 0.3 0.4 v output leakage current i z q: measurement cct 2, inhn = low, v dd = 5.5v v oh = v dd 10 ? v ol = v ss 10 high-level input voltage v ih inhn 2.0 v low-level input voltage v il inhn 0.5 v current consumption i dd inhn = open, measurement cct 3, load cct 1, v dd = 3.0 to 3.6v, c l = 15pf f = 30mhz sm5006ancs cf5006anc sm5006bncs cf5006bnc ?16 ma f = 30mhz, ta = ?0 to 70 c sm5006cncs cf5006cnc ?16 f = 50mhz sm5006ands cf5006and ?326 f = 70mhz sm5006bnes cf5006bne sm5006cnes cf5006cne sm5006dnes cf5006dne ?530 f = 40mhz, ta = ?0 to 70 c sm5006cnds cf5006cnd sm5006dncs cf5006dnc ?122 f = 70mhz sm5006anes cf5006ane sm5006anfs cf5006anf ?040 inhn pull-up resistance r up measurement cct 4 50 150 k ? feedback resistance r f measurement cct 5 sm5006anas, cf5006ana 6.97 8.2 9.43 k ? sm5006anbs, cf5006anb 4.76 5.6 6.44 sm5006ancs, cf5006anc sm5006cncs, cf5006cnc 4.16 4.9 5.64 sm5006ands, cf5006and sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006cnds, cf5006cnd sm5006cnes, cf5006cne 2.21 2.6 2.99 built-in resistance r g design value, determined by the r f value 17 20 23 ? r d design value, determined by the r f value 17 20 23 built-in capacitance c g design value. a monitor pattern on a wafer is tested. 7.44 8 8.56 pf c d design value. a monitor pattern on a wafer is tested. 14.88 16 17.12
sm5006 series seiko npc corporation ? 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, v dd = 4.5v, i oh = 16ma 4.0 4.2 v low-level output voltage v ol q: measurement cct 2, v dd = 4.5v, i ol = 16ma 0.3 0.4 v output leakage current i z q: measurement cct 2, inhn = low, v dd = 5.5v v oh = v dd 10 ? v ol = v ss 10 high-level input voltage v ih inhn 2.0 v low-level input voltage v il inhn 0.8 v current consumption i dd inhn = open, measurement cct 3, load cct 1, v dd = 4.5 to 5.5v, c l = 50pf f = 30mhz sm5006anas cf5006ana ?835 ma f = 40mhz sm5006anbs cf5006anb ?040 f = 60mhz cf5006anc 30 60 f = 60mhz, ta = ?0 to 80 c sm5006ancs 30 50 f = 70mhz cf5006and cf5006bnc ?080 f = 70mhz, ta = ?0 to 80 c sm5006ands sm5006bncs ?070 inhn = open, measurement cct 3, load cct 1, v dd = 4.5 to 5.5v f = 60mhz, c l = 15pf, ta = ?5 to 75 c cf5006cnc 28 50 f = 60mhz, c l = 15pf, ta = 0 to 70 c sm5006cncs 28 50 f = 70mhz, c l = 15pf, ta = ?5 to 75 c cf5006cnd cf5006dnc ?565 f = 70mhz, c l = 15pf, ta = 0 to 70 c sm5006cnds sm5006dncs ?565 f = 100mhz, c l = 15pf, ta = ?0 to 80 c cf5006cne cf5006dne ?580 f = 100mhz, c l = 15pf, ta = 0 to 70 c sm5006cnes sm5006dnes ?580 f = 100mhz, c l = 30pf cf5006ane 50 100 f = 100mhz, c l = 15pf sm5006anes 45 90 f = 107mhz, c l = 30pf, ta = ?0 to 80 c cf5006anf cf5006bne 60 100 f = 107mhz, c l = 15pf, ta = ?0 to 80 c sm5006anfs sm5006bnes ?090 inhn pull-up resistance r up measurement cct 4 50 150 k ? feedback resistance r f measurement cct 5 sm5006anas, cf5006ana 6.97 8.2 9.43 k ? sm5006anbs, cf5006anb 4.76 5.6 6.44 sm5006ancs, cf5006anc sm5006cncs, cf5006cnc 4.16 4.9 5.64 sm5006ands, cf5006and sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006cnds, cf5006cnd sm5006cnes, cf5006cne 2.21 2.6 2.99 built-in resistance r g design value, determined by the r f value 17 20 23 ? r d design value, determined by the r f value 17 20 23 built-in capacitance c g design value. a monitor pattern on a wafer is tested. 7.44 8 8.56 pf c d design value. a monitor pattern on a wafer is tested. 14.88 16 17.12
sm5006 series seiko npc corporation ? 5006 k series v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, v dd = 4.5v, i oh = 16ma sm5006akas, cf5006aka sm5006akbs, cf5006akb sm5006akcs, cf5006akc sm5006ckds, cf5006ckd sm5006dkcs, cf5006dkc 3.9 4.2 v sm5006akds, cf5006akd sm5006bkcs, cf5006bkc 4.0 4.2 low-level output voltage v ol q: measurement cct 2, v dd = 4.5v, i ol = 16ma 0.3 0.4 v output leakage current i z q: measurement cct 2, inhn = low, v dd = 5.5v v oh = v dd 10 ? v ol = v ss 10 high-level input voltage v ih inhn 2.0 v low-level input voltage v il inhn 0.8 v current consumption i dd inhn = open, measurement cct 3, load cct 1, v dd = 4.5 to 5.5v, c l = 15pf f = 30mhz sm5006akas cf5006aka ?632 ma f = 40mhz sm5006akbs cf5006akb ?836 f = 60mhz, ta = ?5 to 75 c cf5006akc cf5006dkc ?550 f = 60mhz, ta = 0 to 70 c sm5006akcs sm5006dkcs ?550 f = 70mhz, ta = ?0 to 80 c cf5006akd cf5006bkc ?570 f = 70mhz, ta = ?5 to 75 c cf5006ckd 35 70 f = 70mhz, ta = 0 to 70 c sm5006akds sm5006bkcs sm5006ckds ?570 inhn pull-up resistance r up measurement cct 4 50 150 k ? feedback resistance r f measurement cct 5 sm5006akas, cf5006aka 6.97 8.2 9.43 k ? sm5006akbs, cf5006akb 4.76 5.6 6.44 sm5006akcs, cf5006akc 4.16 4.9 5.64 sm5006akds, cf5006akd sm5006ckds, cf5006ckd 2.21 2.6 2.99 built-in resistance r g design value, determined by the r f value 17 20 23 ? r d design value, determined by the r f value 17 20 23 built-in capacitance c g design value. a monitor pattern on a wafer is tested. 7.44 8 8.56 pf c d design value. a monitor pattern on a wafer is tested. 14.88 16 17.12
sm5006 series seiko npc corporation ?0 5006ah series v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max high-level output voltage v oh q: measurement cct 1, v dd = 4.5v, i oh = 4ma 3.9 4.2 v low-level output voltage v ol q: measurement cct 2, v dd = 4.5v, i ol = 4ma 0.3 0.5 v output leakage current i z q: measurement cct 2, inhn = low, v dd = 5.5v v oh = v dd 10 ? v ol = v ss 10 high-level input voltage v ih inhn 2.0 v low-level input voltage v il inhn 0.8 v current consumption i dd inhn = open, measurement cct 3, load cct 1, v dd = 4.5 to 5.5v, c l = 15pf f = 30mhz sm5006ahas cf5006aha ?530 ma f = 40mhz sm5006ahbs cf5006ahb ?836 f = 60mhz, ta = ?0 to 80 c cf5006ahc 25 50 f = 60mhz, ta = ?5 to 75 c sm5006ahcs 25 50 f = 70mhz, ta = ?0 to 80 c cf5006ahd 32 65 f = 70mhz, ta = ?5 to 75 c sm5006ahds 32 65 inhn pull-up resistance r up measurement cct 4 50 150 k ? feedback resistance r f measurement cct 5 sm5006ahas, cf5006aha 6.97 8.2 9.43 k ? sm5006ahbs, cf5006ahb 4.76 5.6 6.44 sm5006ahcs, cf5006ahc 4.16 4.9 5.64 sm5006ahds, cf5006ahd 2.21 2.6 2.99 built-in resistance r g design value, determined by the r f value 17 20 23 ? r d design value, determined by the r f value 17 20 23 built-in capacitance c g design value. a monitor pattern on a wafer is tested. 7.44 8 8.56 pf c d design value. a monitor pattern on a wafer is tested. 14.88 16 17.12
sm5006 series seiko npc corporation ?1 switching characteristics 5006 n series 3v operation: v dd = 2.7 to 3.6v, v ss = 0v, ta = ? 20 to 80 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 1, 0.1v dd to 0.9v dd , c l = 15pf, ta = ?0 to 70 c sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006cncs, cf5006cnc sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 3.5 7.0 ns t r2 measurement cct 3, load cct 1, 0.1v dd to 0.9v dd , c l = 15pf sm5006ancs, cf5006anc sm5006ands, cf5006and sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006bncs, cf5006bnc sm5006bnes, cf5006bne sm5006cnes, cf5006cne sm5006dnes, cf5006dne 3.5 7.0 output fall time t f1 measurement cct 3, load cct 1, 0.9v dd to 0.1v dd , c l = 15pf, ta = ?0 to 70 c sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006cncs, cf5006cnc sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 3.5 7.0 ns t f2 measurement cct 3, load cct 1, 0.9v dd to 0.1v dd , c l = 15pf sm5006ancs, cf5006anc sm5006ands, cf5006and sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006bncs, cf5006bnc sm5006bnes, cf5006bne sm5006cnes, cf5006cne sm5006dnes, cf5006dne 3.5 7.0 output duty cycle *1 *1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 1, ta = 25 c, v dd = 3.3v, c l = 15pf, f = 30mhz sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006ancs, cf5006anc sm5006cncs, cf5006cnc 40?0 % measurement cct 3, load cct 1, ta = 25 c, v dd = 3.3v, c l = 15pf, f = 40mhz sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 40?0 measurement cct 3, load cct 1, ta = 25 c, v dd = 3.3v, c l = 15pf, f = 50mhz sm5006ands, cf5006and sm5006bncs, cf5006bnc 40?0 measurement cct 3, load cct 1, ta = 25 c, v dd = 3.3v, c l = 15pf, f = 70mhz sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006bnes, cf5006bne sm5006cnes, cf5006cne sm5006dnes, cf5006dne 40?0 output disable delay time t plz measurement cct 3, load cct 1, ta = 25 c, v dd = 5v, c l 15pf 100 ns output enable delay time t pzl 100 ns
sm5006 series seiko npc corporation ?2 5v operation: v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 1, 0.1v dd to 0.9v dd , c l = 15pf sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006cncs, cf5006cnc sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 2.0 4.0 ns sm5006ancs, cf5006anc sm5006ands, cf5006and sm5006bncs, cf5006bnc sm5006cnes, cf5006cne sm5006dnes, cf5006dne 1.5 3.0 t r2 measurement cct 3, load cct 1, 0.1v dd to 0.9v dd , c l = 30pf cf5006ane cf5006anf cf5006bne 2.0 4.0 t r3 measurement cct 3, load cct 1, 0.1v dd to 0.9v dd , c l = 50pf sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006cncs, cf5006cnc sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 4.0 8.0 sm5006ancs, cf5006anc sm5006ands, cf5006and sm5006bncs, cf5006bnc sm5006cnes, cf5006cne sm5006dnes, cf5006dne 3.5 7.0 sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006bnes, cf5006bne 3.0 6.0 output fall time t f1 measurement cct 3, load cct 1, 0.9v dd to 0.1v dd , c l = 15pf sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006cncs, cf5006cnc sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 2.0 4.0 ns sm5006ancs, cf5006anc sm5006ands, cf5006and sm5006bncs, cf5006bnc sm5006cnes, cf5006cne sm5006dnes, cf5006dne 1.5 3.0 t f2 measurement cct 3, load cct 1, 0.9v dd to 0.1v dd , c l = 30pf cf5006ane cf5006anf cf5006bne 2.0 4.0 t f3 measurement cct 3, load cct 1, 0.9v dd to 0.1v dd , c l = 50pf sm5006anas, cf5006ana sm5006anbs, cf5006anb sm5006cncs, cf5006cnc sm5006cnds, cf5006cnd sm5006dncs, cf5006dnc 4.0 8.0 sm5006ancs, cf5006anc sm5006ands, cf5006and sm5006bncs, cf5006bnc sm5006cnes, cf5006cne sm5006dnes, cf5006dne 3.5 7.0 sm5006anes, cf5006ane sm5006anfs, cf5006anf sm5006bnes, cf5006bne 3.0 6.0
sm5006 series seiko npc corporation ?3 output duty cycle *1 duty measurement cct 3, load cct 1, ta = 25 c, v dd = 5.0v f = 30mhz, c l = 50pf sm5006anas cf5006ana 45?5 % f = 40mhz, c l = 50pf sm5006anbs cf5006anb 45?5 f = 60mhz, c l = 50pf sm5006ancs cf5006anc 45?5 f = 70mhz, c l = 50pf sm5006ands cf5006and sm5006bncs cf5006bnc 45?5 f = 100mhz, c l = 30pf cf5006ane 45 55 f = 100mhz, c l = 15pf sm5006anes 45 55 f = 107mhz, c l = 30pf cf5006anf cf5006bne 45?5 f = 107mhz, c l = 15pf sm5006anfs sm5006bnes 45?5 f = 50mhz, c l = 50pf sm5006cncs cf5006cnc sm5006dncs cf5006dnc 45?5 f = 100mhz, c l = 15pf sm5006cnes cf5006cne sm5006dnes cf5006dne 45?5 f = 60mhz, c l = 15pf sm5006cncs cf5006cnc 40?0 f = 70mhz, c l = 15pf sm5006cnds cf5006cnd sm5006dncs cf5006dnc 40?0 output disable delay time t plz measurement cct 3, load cct 1, ta = 25 c, v dd = 5v, c l 15pf 100 ns output enable delay time t pzl 100 ns *1. the duty cycle characteristic is checked the sample chips of each production lot. parameter symbol condition rating unit min typ max
sm5006 series seiko npc corporation ?4 5006 k series v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. 5006ah series v dd = 4.5 to 5.5v, v ss = 0v, ta = ? 40 to 85 c unless otherwise noted. parameter symbol condition rating unit min typ max output rise time t r measurement cct 3, load cct 1, 0.4v to 2.4v, v dd = 4.5 to 5.5v c l = 15pf 2 4 ns c l = 50pf 7 output fall time t f measurement cct 3, load cct 1, 2.4v to 0.4v, v dd = 4.5 to 5.5v c l = 15pf 2 4 ns c l = 50pf 7 output duty cycle *1 *1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 1, ta = 25 c, v dd = 5.0v, c l = 15pf f = 30mhz sm5006akas cf5006aka 45?5 % f = 40mhz sm5006akbs cf5006akb 45?5 f = 60mhz sm5006akcs cf5006akc 40?0 f = 70mhz sm5006akds cf5006akd sm5006bkcs cf5006bkc 45?5 f = 50mhz sm5006dkcs cf5006dkc 45?5 f = 70mhz sm5006ckds cf5006ckd sm5006dkcs cf5006dkc 40?0 output disable delay time t plz measurement cct 3, load cct 1, ta = 25 c, v dd = 5v, c l 15pf 100 ns output enable delay time t pzl 100 ns parameter symbol condition rating unit min typ max output rise time t r1 measurement cct 3, load cct 1, 0.1v dd to 0.9v dd c l = 15pf 5.0 7.0 ns t r2 c l = 50pf 13 21 output fall time t f1 measurement cct 3, load cct 1, 0.9v dd to 0.1v dd c l = 15pf 5.0 7.0 ns t f2 c l = 50pf 13 21 output duty cycle *1 *1. the duty cycle characteristic is checked the sample chips of each production lot. duty measurement cct 3, load cct 1, ta = 25 c, v dd = 5.0v, c l = 15pf f = 30mhz sm5006ahas cf5006aha 45?5 % f = 40mhz sm5006ahbs cf5006ahb 45?5 f = 50mhz sm5006ahcs cf5006ahc 45?5 f = 60mhz, ta = ?0 to 80 c cf5006ahc 40 60 f = 60mhz, ta = ?5 to 75 c sm5006ahcs 40 60 f = 70mhz, ta = ?0 to 80 c cf5006ahd 40 60 f = 70mhz, ta = ?5 to 75 c sm5006ahds 40 60 output disable delay time t plz measurement cct 3, load cct 1, ta = 25 c, v dd = 5v, c l 15pf 100 ns output enable delay time t pzl 100 ns
sm5006 series seiko npc corporation ?5 current consumption and output waveform with npcs standard crystal functional description standby function when inhn goes low, the oscillator output on q goes high impedance. inhn q oscillator high (or open) f o output frequency normal operation low high impedance normal operation f [mhz] r [ ? ] l [mh] ca [ff] cb [pf] 30 18.62 16.24 1.733 5.337 40 20.53 11.34 1.396 3.989 50 22.17 7.40 1.370 4.105 70 25.42 4.18 1.254 5.170 100 16.60 3.56 0.726 5.394 107 35.83 2.98 0.732 2.265 l ca r cb
sm5006 series seiko npc corporation ?6 measurement circuits measurement cct 1 3.5v p ? p , 10mhz sine wave input signal (5v operation) 2.0v p ? p , 10mhz sine wave input signal (3v operation) c1 : 0.001 f r1 : 50 ? r2 : 250 ? (5006 n /5v operation) 275 ? (5006 n /3v operation) 245 ? (5006aka, akb, akc, ckd, dkc) 250 ? (5006akd, bkc) 975 ? (5006ah ) r fo : 2.7k ? (5006b , d ) measurement cct 4 measurement cct 2 measurement cct 5 measurement cct 3 r fo : 2.7k ? (5006b , d ) signal generator vdd vss xt q r1 r2 c1 v oh 0v q out monitor xtn r fo vdd vss i pr 5.0v inhn r up = v dd i pr v ih a vdd vss q i ol, i z v ol v a inhn xt i z vdd vss i rf r f = xt v dd i rf xtn a vdd vss xt q x'tal xtn inhn a r fo i dd i st
sm5006 series seiko npc corporation ?7 load cct 1 load cct 2 switching time measurement waveform output duty level (cmos) output duty level (ttl) output duty cycle (cmos) output duty cycle (ttl) q output c l (including probe capacitance) q output (including probe capacitance) 400 ? c l 0.9v dd 0.1v dd 0.9v dd 0.1v dd t r t f q output duty measurement voltage (0.5v dd ) t w 2.4v dd 0.4v dd 2.4v dd 0.4v dd t r t f q output duty measurement voltage (1.4v dd ) t w duty measurement voltage ( 0.5v dd ) q output t w t duty= t w / t 100 (%) duty measurement voltage ( 1.4v dd ) q output t w t duty= t w / t 100 (%)
sm5006 series seiko npc corporation ?8 output enable/disable delay q output inhn v ih v il t plz t pzl inhn input waveform t r = t f 10ns
sm5006 series seiko npc corporation ?9 nc9713fe 2006.04 please pay your attention to the following points at time of using the products shown in this document. the products shown in this document (hereinafter ?roducts? are not intended to be used for the apparatus that exerts harmful in?ence on human lives due to the defects, failure or malfunction of the products. customers are requested to obtain prior written agreeme nt for such use from seiko npc corporation (hereinafter ?pc?. customers shall be solely responsible for, and indemnify and hold npc free and harmless from, any and all claims, damages, losses, expenses or lawsuits, due to such use without such agreement. npc reserves the right to change the speci?ations of the products in order to improve the characteristic or reliability thereof. npc makes no claim o r warranty that the contents described in this document dose not infringe any intellectual property right or other similar right owned by third parties. therefore, npc shall not be responsible for such problems, even if the use is in accordance with the descriptions provided in t his document. any descriptions including applications, circuits, and the parameters of the products in this document are for reference to use the products, and shall not be guaranteed free from defect, inapplicability to the design for the mass-production products without further te sting or modi?ation. customers are requested not to export or re-export, directly or indirectly, the products to any country or any ent ity not in compliance with or in violation of the national export administration laws, treaties, orders and regulations. customers are req uested appropriately take steps to obtain required permissions or approvals from appropriate government agencies. seiko npc corporation 15-6, nihombashi-kabutocho, chuo-ku, tokyo 103-0026, japan telephone: +81-3-6667-6601 facsimile: +81-3-6667-6611 http://www.npc.co.jp/ email: sales @ npc.co.jp

▲Up To Search▲

Price & Availability of CF5006AKC-1

	To Download CF5006AKC-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .